How much resin do I need?

How much resin you need depends on the size and depth of the pour. The chart below gives amounts for common projects, and the resin calculator works out your exact size with part A and part B.

What are you pouring?
Measurements
Measure in
in
in
in

How thick the resin will be. A flood coat is 1/8 in (3 mm).

Your resin
Mix ratio, A to B
The label's ratio is by
Resin type, extra and densityCoating resin · 10% extra · 1.1 g/ml

Sets how deep one pour can be, so the calculator can split a deep job into layers.

%

For drips, edges and what stays in the cup.

g/ml

For weight. 1.1 is typical. Your label may list it.

How much to mix

Mix in total

65.8 fl oz

59.8 fl oz to fill the shape, plus 10% extra.

2 Add B to 65.8 fl oz 1 Pour A to 32.9 fl oz A B
Part A and part B at 1:1 by volume
1:1 by volumeAmount
Part A (resin)32.9 fl oz
Part B (hardener)32.9 fl oz
Total65.8 fl oz

Thin coat, one pour

Most coating resins level out to about 1/8 in (3 mm) on their own, so this goes on in one flood coat.

Same total: 1,947 ml · 1.95 L · 0.514 gal · 2.14 kg* · 4.72 lb* *Weight at 1.1 g/ml, an estimate.

How this was worked out
  1. Volume: 36 × 24 × 1/8 in = 108 in³ = 1,770 ml.
  2. Add 10% extra: 1,770 ml × 1.1 = 1,947 ml.
  3. Split 1:1 by volume: part A = 1,947 ml × 1 ÷ 2 = 973 ml. Part B = 973 ml. Each is rounded, so they can be 1 ml off the total.
  4. Weight, an estimate: 1,947 ml × 1.1 g/ml = 2,141 g.

How much resin for common projects

Typical sizes, with 10% extra. For your exact size, use the calculator above.

Mixed resin by project
Projectfl ozmlResin type
Pendant, 1 × 1.5 in, 1/4 in0.23 fl oz6.8 mlCasting
4 coasters, 4 in round, 1/4 in7.66 fl oz227 mlCoating or casting
20 oz tumbler, 2 coats2.87 fl oz85 mlCoating
12 × 12 in canvas, 1/8 in11 fl oz324 mlCoating
Serving tray, 12 × 18 in, 1/8 in16.5 fl oz487 mlCoating
Cutting board seal, 12 × 18 in, 1/16 in8.23 fl oz243 mlCoating
24 × 24 in painting, 1/8 in43.9 fl oz1,298 mlCoating
Clock, 12 in round, 1/4 in17.2 fl oz510 mlCoating
Coffee table, 48 × 24 in, 1/8 in87.8 fl oz2,596 mlCoating
Dining table, 72 × 36 in, 1/8 in197 fl oz5,840 mlCoating
Bar top, 96 × 24 in, 1/8 in176 fl oz5,191 mlCoating
River table, 72 × 7 in, 1.5 in deep461 fl oz13,627 mlDeep-pour

Work it out in three steps

  1. Measure length, width and depth in the same unit. For a circle, halve the diameter to get the radius.
  2. Multiply them: length × width × depth, or 3.14 × radius × radius × depth. That's the volume.
  3. Convert and add extra. Cubic inches × 16.4 gives ml, and ml ÷ 29.6 gives fl oz. Then add 10%.

Worked example: a 24 × 24 in painting

  1. 24 × 24 × 0.125 = 72 cubic inches.
  2. 72 × 16.39 = 1,180 ml.
  3. With 10% extra: 1,298 ml, or 43.9 fl oz.
  4. At 1:1, that's 649 ml of each part.

Rules of thumb

  • A 1/8 in coat takes about 9.97 fl oz (295 ml) per square foot. A 1/16 in seal coat takes half that.
  • Double the depth, double the resin. Double the length and width, four times the resin.
  • Wood, live edges and drips over the sides need 15 to 20% extra, not 10%.
  • Kits are sold by the total of both bottles. A 1:1 kit sold as 1 gallon is usually half a gallon of each part, so check the label.

Too much or too little?

Mix a little more than you need. If you run short in the middle of a coat, the first batch has already started to set by the time a second one is ready, and the join can show. Leftover mixed resin can go into a small mould for a keyring or a test piece. Unmixed resin keeps for months with the lids on tight, but check the label for its shelf life.

Questions

How much resin do I need per square foot?

About 9.97 fl oz for a 1/8 in coat and half that for a 1/16 in seal coat, before extra.

How much resin do I need for a 24 × 24 painting?

About 43.9 fl oz (1,298 ml) for one 1/8 in coat, with 10% extra.

Is it better to buy too much resin?

Yes. Running short in the middle of a pour is worse than leftovers. Unmixed resin keeps for months if sealed, so a bigger kit isn't wasted.

How do I know what size resin kit to buy?

Work out the total mixed amount with the calculator, then pick a kit whose two bottles add up to at least that. A 1 gallon kit is usually the total of both parts.