Resin calculator in ml

This resin calculator in ml is set up for metric: sizes in cm or mm, amounts in ml. Type your mould or tray size to get the resin to mix, part A and part B, and the weight in grams.

What are you pouring?
Measurements
Measure in
cm
cm
cm

How thick the resin will be. A flood coat is 1/8 in (3 mm).

Your resin
Mix ratio, A to B
The label's ratio is by
Resin type, extra and densityCoating resin · 10% extra · 1.1 g/ml

Sets how deep one pour can be, so the calculator can split a deep job into layers.

%

For drips, edges and what stays in the cup.

g/ml

For weight. 1.1 is typical. Your label may list it.

How much to mix

Mix in total

330 ml

300 ml to fill the shape, plus 10% extra.

2 Add B to 330 ml 1 Pour A to 165 ml A B
Part A and part B at 1:1 by volume
1:1 by volumeAmount
Part A (resin)165 ml
Part B (hardener)165 ml
Total330 ml

One pour

It's within the 1/4 in (6 mm) per pour you set. Check the most your resin can take in one go on the label.

Same total: 0.33 L · 11.2 fl oz · 0.087 gal · 0.363 kg* · 0.8 lb* *Weight at 1.1 g/ml, an estimate.

How this was worked out
  1. Volume: 30 × 20 × 0.5 cm = 300 ml.
  2. Add 10% extra: 300 ml × 1.1 = 330 ml.
  3. Split 1:1 by volume: part A = 330 ml × 1 ÷ 2 = 165 ml. Part B = 165 ml.
  4. Weight, an estimate: 330 ml × 1.1 g/ml = 363 g.

Resin in ml for metric moulds

Volume, then with 10% extra, then the weight at 1.1 g per ml.

Mixed resin for common metric sizes
ProjectVolumeWith 10%Weight
10 cm round coaster, 6 mm47 ml52 ml57 g
10 × 10 cm square coaster, 6 mm60 ml66 ml73 g
20 × 30 cm tray, 5 mm300 ml330 ml363 g
30 cm round tray, 6 mm424 ml467 ml513 g
30 × 40 cm canvas, 3 mm360 ml396 ml436 g
60 × 40 cm board, 3 mm720 ml792 ml871 g
120 × 60 cm table, 3 mm2,160 ml2,376 ml2,614 g

Worked example in mm

A 300 × 200 mm tray, 5 mm deep

  1. Volume: 300 × 200 × 5 = 300,000 cubic mm.
  2. Divide by 1,000 to get ml: 300 ml. (Or work in cm: 30 × 20 × 0.5 = 300 cm³, which is 300 ml.)
  3. Add 10%: 330 ml.
  4. Mix 1:1: 165 ml of each part. Mix 2:1: 220 ml and 110 ml.
  5. By weight at 1.1 g/ml: 363 g in total.

ml, grams and conversions

Handy resin conversions
AmountEquals
1 cubic cm (cm³)1 ml
1 cubic inch (in³)16.39 ml
1 US fl oz29.57 ml
1 US cup236.6 ml
1 litre1,000 ml
1 US gallon3,785 ml
100 ml of mixed epoxyabout 110 g
1 kg of mixed epoxyabout 910 ml

One ml of mixed epoxy weighs more than one gram, usually about 1.1 g. So a 1 kg kit holds about 910 ml, not 1,000 ml. When a label gives the ratio by weight, like 100:45, pick Weight in the calculator and weigh both parts on a scale. When it gives the ratio by volume, use ml and a graduated cup.

cm or mm?

Use whichever your ruler and label use. Most resin labels give pour depth in mm, so mm saves a step. The calculator converts everything, and a share link keeps your choice. Type depths like 3 for 3 mm, or 0.3 if you're working in cm. A comma works too, so 0,3 is read as 0.3.

Questions

How do I calculate resin in ml?

Measure in cm and multiply length × width × depth. The answer in cubic cm is the answer in ml. If you measured in mm, divide the result by 1,000.

How many grams is 100 ml of resin?

About 110 g for most mixed epoxy. Check your label's density or specific gravity for the exact number.

Is 1 ml of resin 1 gram?

No. Mixed epoxy is denser than water, usually about 1.1 g per ml. So grams and ml give different numbers for the same amount.

How many ml of resin for a 10 cm coaster?

About 47 ml for a 10 cm round coaster 6 mm thick, or 52 ml with 10% extra.